You can customize the IP for use in your design by specifying values for the various parameters associated with the IP core using the following steps:
- Select the IP from the IP catalog.
- Double-click the selected IP or select the Customize IP command from the toolbar or right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) and the Vivado Design Suite User Guide: Getting Started (UG910).
If you are customizing and generating the core in the Vivado IP Integrator, see the
Vivado Design Suite User Guide: Designing
IP Subsystems using IP Integrator (UG994) for detailed information. IP Integrator might
auto-compute certain configuration values when validating or generating the design. To check
whether the values do change, see the description of the parameter in this chapter. To view
the parameter value, you can run the
validate_bd_design command in the Tcl
console.Note: Figures in this chapter are illustrations of the Vivado IDE. This layout might
vary from the current version.