The BootROM sets configuration registers that apply to each boot mode. For octal SPI boot mode, the BootROM sets the registers to the initial values.
System Register Settings
| Register Name | Base Address | Register Value | Description |
|---|---|---|---|
| CRP Clock and Reset Register Module | |||
| PMCPLL_CTRL | 0xF126_0040 |
0x0002_4800
|
PMC PLL (PPLL) setup uses reset defaults (REF_CLK multiplied by 72 (FBDIV) and divided by 4 (CLKOUTDIV)) |
| OSPI_REF_CTRL | 0xF126_0120 |
0x0100_0B00
|
Select PPLL divided by 11 (DIVISOR), clock enabled |
| RST_OSPI | 0xF126_0304 |
0x0000_0000
|
OSPI RST not asserted |
| PMC_IOP_SLCR Register Module | |||
| MIO_Bank0_Schmitt_en | 0xF106_010C |
0x0000_17BF
|
Enable Schmitt on OSPI MIO pins |
| MIO_Bank0_Tristate | 0xF106_0200 |
0x03FF_E840
|
Disable 3-state override on OSPI MIO pins |
| OSPI_AXI_Sel | 0xF106_0504 |
0x0000_0001
|
OSPI selected |