The Alveo X3522PV is available in a passive cooling configuration and is designed for installation into a data center server where controlled air flow provides direct cooling to the card. The following figure shows the Alveo X3522PV, including the following interfaces:
- A PCIe® card connector
- Two DSFP interfaces
- ADK2 debug connector
- PPS In & Out ports
Figure 1.
Alveo X3522PV Adaptable Accelerator
Card
CAUTION:
Alveo X3522PV adaptable accelerator cards are designed to be
installed into a data center server, where controlled air flow provides direct
cooling. If the cooling enclosure is removed from the card and the card is
powered-up, external fan cooling airflow MUST be applied to prevent over-temperature
shut-down and possible damage to the card electronics. Removing the cooling
enclosure voids the board warranty.
For card specifications, dimensions, list of card features and airflow requirements, refer to the Alveo X3522 Data Sheet (DS1002).