AMS Example

This example is used to measure AMS control block voltages via single channel sequencer off mode.

Expected Output





                              Entering Sysmon AMS Example Test
                             




                             1. EOC: Done , VCC_PSPLL: 1.202 Volts
                             



                             2. EOC: Done , VCC_PSBATT: 1.636 Volts
                             



                             3. EOC: Done , VCCINT: 0.844 Volts
                             



                             4. EOC: Done , VCCBRAM: 0.845 Volts
                             



                             5. EOC: Done , VCCAUX: 1.798 Volts
                             



                             6. EOC: Done , VCC_PSDDRPLL: 1.805 Volts
                             



                             7. EOC: Done , VCC_PSDDRPHY_REF: 0.217 Volts
                             



                             8. EOC: Done , VCC_PSINTFP_DDR: 0.848 Volts
                             



                             Successfully ran Sysmon AMS Example Test