/dts-v1/;
/plugin/;
/ {
fragment@0 {
target = <&fpga>;
overlay0: __overlay__ {
firmware-name = "partial_1.pdi";
partial-fpga-config;
};
fragment@1 {
target = <&amba>;
overlay1: __overlay__ {
axi_gpio_0: gpio@a0000000 {
#gpio-cells = <3>;
clock-names = "s_axi_aclk";
clocks = <&zynqmp_clk 71>;
compatible = "xlnx,axi-gpio-2.0", "xlnx,xps-gpio-1.00.a";
gpio-controller ;
reg = <0x0 0xa0000000 0x0 0x1000>;
xlnx,all-inputs = <0x0>;
xlnx,all-inputs-2 = <0x0>;
xlnx,all-outputs = <0x1>;
xlnx,all-outputs-2 = <0x0>;
xlnx,dout-default = <0x00000000>;
xlnx,dout-default-2 = <0x00000000>;
xlnx,gpio-width = <0x8>;
xlnx,gpio2-width = <0x20>;
xlnx,interrupt-present = <0x0>;
xlnx,is-dual = <0x0>;
xlnx,tri-default = <0xFFFFFFFF>;
xlnx,tri-default-2 = <0xFFFFFFFF>;
};
};
};
|