xilinx-pcie 10000000.pciex: PCIe Link is UP PCI host bridge /amba_pl/pciex@10000000 ranges: MEM 0x80000000..0x8fffffff -> 0x80000000 xilinx-pcie 10000000.pciex: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff] pci 0000:00:00.0: [10ee:0705] type 01 class 0x060400 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:01:00.0: [14e4:1677] type 00 class 0x020000 pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x8000ffff 64bit] pci 0000:01:00.0: reg 0x30: [mem 0x90480000-0x9048ffff pref] pci 0000:01:00.0: PME# supported from D3hot D3cold pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] pci 0000:00:00.0: BAR 8: assigned [mem 0x80000000-0x800fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x80000000-0x8000ffff 64bit] pci 0000:01:00.0: BAR 6: assigned [mem 0x80010000-0x8001ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x80000000-0x800fffff] ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 30600000.serial: ttyUL0 at MMIO 0x30600000 (irq = 3, base_baud = 0) is a uartlite console [ttyUL0] enabled brd: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed tg3.c:v3.137 (May 11, 2014) pci 0000:00:00.0: enabling device (0000 -> 0002)