[ 114.970887] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 114.982333] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 115.087894] scsi host0: ahci-ceva [ 115.125262] scsi host1: ahci-ceva [ 115.148929] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq 21 [ 115.158564] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq 21 ....... [ 115.527243] ata2: SATA link down (SStatus 0 SControl 310) ....... [ 115.737400] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 115.753180] ata1.00: ATA-9: WDC WD10EZRX-00D8PB0, 80.00A80, max UDMA/133 [ 115.761967] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 115.779595] ata1.00: configured for UDMA/133 [ 115.813492] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZRX-00D 0A80 PQ: 0 ANSI: 5 [ 115.882970] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 115.893109] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 115.916793] sd 0:0:0:0: [sda] Write Protect is off [ 115.932641] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 116.103856] m25p80 spi32765.0: unrecognized JEDEC id bytes: 00, 0, 0 [ 116.337136] libphy: Fixed MDIO Bus: probed [ 116.417710] CAN device driver interface [ 116.555962] libphy: MACB_mii_bus: probed [ 116.700991] sda: [ 116.770738] sd 0:0:0:0: [sda] Attached SCSI disk