User Dashboard

VCK190/VMK180 Board Evaluation and Management (BEAM) Tool User Guide (UG1573)

Document ID
UG1573
Release Date
2023-02-22
Revision
1.0 English

The user dashboard helps to debug read and write issues and can be used to plot (display graphs) for any register by name/address.

Debugger

You can read/write to/from any register by name/address (use thehelp command to see all supported formats). Click the EXECUTE button or press the Enter key to execute a command. You can upload any valid text file with multiple read/writes by clicking the Upload Files button. The read help command lists all supported read formats. The write help command lists all supported write formats. The clear/cls command clears the debugger screen.

Plot

Graphs for registers can be plotted by name/address. A maximum of eight plots can be configured at a time. The number of plots is selected from the drop-down menu. Place the mouse over the info icon for more information. Click the GENERATEbutton to display the graph with the requested parameters. Click the CLOSE button to stop monitoring the graphs.
Figure 1. Plotting Graphs
Figure 2. Graph Generation