Scroll down to the Design Timing Summary section in the timing summary report. You will see that rev1 has a WNS and TNS, which are both zero. This indicates that the rev1 build meets timing.
...
------------------------------------------------------------------------------------------------
| Design Timing Summary
| ---------------------
------------------------------------------------------------------------------------------------
WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints WPWS(ns) TPWS(ns) TPWS Failing Endpoints TPWS Total Endpoints
------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- -------- -------- ---------------------- --------------------
0.069 0.000 0 801171 0.000 0.000 0 791955 0.000 0.000 0 353397
...
The rev0 build has a negative slack and fails timing while the rev1 build does not. During the Vitis compiler linker step, the rev0 and rev1 builds used different configuration files. A configuration file is used to specify more Vitis compiler options. The rev0 build used the config.ini file with no timing closure technique options. The rev1 build used the config_2regslice.ini file, which is similar to the config.ini but contains additional timing closure techniques. Both the *.ini files are located in Module_04_AI_Engine_and_PL_Integration/ folder. The next sections detail the config.ini file for the rev0 build, and then the changes made in the config_2regslice.ini for a successful rev1 build, which meets timing.