Run HW emulation with the following
makecommand to build the HW system and host application.
Tip: If the keyboard is accidentally hit and stops the system booting automatically, type boot at the
Versal>prompt to resume the system booting.
After Linux has booted, run the following commands at the Linux prompt (this is only for HW cosim).
mount /dev/mmcblk0p1 /mnt cd /mnt export XILINX_XRT=/usr export XCL_EMULATION_MODE=hw_emu ./host.exe a.xclbin
To exit QEMU press Ctrl+A, x.
To run in hardware, first build the system and application using the following make command.
make package TARGET=hw
After Linux has booted, run the following commands at the Linux prompt.
mount /dev/mmcblk0p1 /mnt cd /mnt export XILINX_XRT=/usr ./host.exe a.xclbin
The host code is self-checking; it checks the correctness of the output data. If the output data is correct, after the run has completed, it will print: