Step 1.1 Prepare the boot image and boot the board - 2022.2 English

Vitis Tutorials: AI Engine Development

Document ID
XD100
Release Date
2022-12-01
Version
2022.2 English

After the design is built correctly without error, we are ready to run on the hardware board.

  • Flash the SD card with the built sd_card.img.

  • Plug the flashed SD card into the SD card slot of the vck190 board.

  • Connect the USB type C cable to the board and computer that supports serial port connection.

  • Set the serial port configuration with Speed=115200, Data=8 bit, Parity=none, Stop bits=1 bit and flow control=none.

  • Power up the vck190 board to see boot messages from serial connection.