Vitis Tutorials: Getting Started - 2022.2 English

Document ID: XD098
Release Date: 2022-11-07
Version: 2022.2 English

Vitis Tutorials: Getting Started
Vitis Introduction and Getting Started
Installation and Configuration
Part 2 : Installation and Configuration
Step 1 – Review the Installation Requirements
Step 2 – Download Vitis
Step 3 – Install Downloaded Packages
Step 4 – Download and Install the Required Platform files
Step 4A - Installing Data Center Platform Files
Step 4B - Installing Embedded Processor Platform Files
Step 5 – Setup the environment to run Vitis
Next Step
Review the Kernel Code and Host Application
Part 3 : Review the Kernel Code and Host Application
The Source Code for the Vector-Add Kernel
The Source Code for the Host Program
Next Step
Build and Run the Data Center Application
Part 4 : Build and Run the Data Center Application
Building and Running on Alveo U200 Data-Center Accelerator Card
Setting up the environment
Targeting Software Emulation
Targeting Hardware Emulation
Targeting Hardware
Next Step
Build and Run the Embedded Processor Application
Part 4 : Build and Run the Embedded Processor Application
Building and Running on ZCU102 Zynq MPSoC Embedded Processor Platform
Setting up the environment
Targeting Software Emulation
Targeting Hardware Emulation
Targeting Hardware
Next Step
Visualizing Results and Viewing Report
Part 5 : Visualizing Results and Analyzing Reports
Locating the Reports and Summaries
Opening the Run Summary with Vitis Analyzer
Homework
Wrap-Up and Next Steps
Vitis HLS
Creating a Vitis HLS Project
Conclusion
Running High-Level Synthesis and Analyzing Results
Run the C Simulation
Run C Synthesis
Analyze the Results
Next Step
Using Optimization Techniques
Configure the Pipeline Loops Threshold
Configure the Pipeline Initiation Interval
Assign Dual-Port RAMs with BIND_STORAGE
Assign an Array Partition
Next Step
Reviewing the DATAFLOW Optimization
4. Reviewing the DATAFLOW Optimization
Create a New Solution
Add the DATAFLOW Optimization
View the Dataflow Graph
Convert the Directives into Pragmas
Export the Vitis Kernel
Summary
Vitis Libraries
Before You Begin
Setup Environment
Get Vitis Libraries
Running the Tutorial
Create and run a HLS project
Use the Exported IP in RTL Design with Vivado Flow
Summary
Reference
Vitis Platform
Step 1: Create Vivado Design and Generate XSA
Step 2: Create Vitis Platform
Step 3: Validate this Vitis PLatform
Run the Application on Hardware
Fast Track

Back to home page