Run C/RTL Co-Simulation - 2023.2 English

Vitis Tutorials: Getting Started

Document ID
XD098
Release Date
2023-11-13
Version
2023.2 English
  1. Open the Config File editor, an select the C/RTL Co-Simulation category on the left side. The options for Co-simulation are displayed on the right.

  2. Select enable_dataflow_profiling to turn on the feature.

  3. Select enable_fifo_sizing to turn on this feature.

  4. Select Run under C/RTL Co-Simulation in the Flow Navigator.

The DATAFLOW optimization is a dynamic optimization that can only really be understood after C/RTL co-simulation which provides needed performance data. After co-simulation the columns of the Process table are populated with values from the simulation results.

Dataflow Report