Analog Power Supply Pins

Versal Adaptive SoC GTY and GTYP Transceivers Architecture Manual (AM002)

Document ID
AM002
Release Date
2023-10-26
Revision
1.3 English

The GTY transceiver Quad analog power supplies (GTY_AVCC, GTY_AVTT, and GTY_AVCCAUX) have planes inside the package. For some of the packages, there are multiple planes for each analog power supply. If there is more than one PSG in the package, the power supply pin names have a suffix (such as _L, or _R) that identifies which pins are associated with which PSG. If all the Quads in a PSG are not used, the associated power pins can be left unconnected or tied to GND. The rules for powering PSGs are as follows:

  • Within a package PSG, if no Quads are used, the PSG can be unpowered.
  • If any Quads in a PSG are used, the PSG must be powered.
  • PSGs on each side (Left or Right) of the package are fully independent. Powering or not powering PSGs on one side of the package does not affect the PSGs on the other sides of the package.
  • If a PSG does not have an RCAL master and it is powered, all the PSGs on that side (left or right) of the package must be powered.
  • If a PSG with an RCAL master is unpowered, any PSG without an RCAL master on that side of the package must also be unpowered.
  • A PSG that does not have an RCAL master can be unpowered without affecting other PSGs.
For each GTY transceiver analog power supply group there are three power supplies (GTY_AVCC, GTY_AVTT, and GTY_AVCCAUX). For example, if there are two PSGs in a package, there are a total of six power supply planes in the package for these groups, with three planes in the package for each PSG. The following table shows the power supply groups for Versal adaptive SoCs.
Note: Refer to Versal Adaptive SoC Packaging and Pinouts Architecture Manual (AM013) for details on the specific package die information.
Table 1. Versal Adaptive SoC Transceiver Power Supply Groups and RCAL Master by Package
Device Package GTY Transceiver
103 104 105 106 200 201 202 203 204 205 206
VM1802 VC1760 L L L

RCL

L RS RS RS RS

RCL

RN RN RN
VD1760 L L L

RCL

L       R

RCL

R    
VA2197 L L L

RCL

L R R R R

RCL

R R R
VC1902 VA1596 L L L

RCL

L     R R

RCL

R R  
VD1760 L L L

RCL

L       R

RCL

R    
VA2197 L L L

RCL

L R R R R

RCL

R R R
  1. In each cell, the top row is the power supply group designator. If the second row contains RCL, that Quad is an RCAL master.