Boot Interface Signals

Versal Adaptive SoC Technical Reference Manual (AM011)

Document ID
Release Date
1.6 English

The boot process requires the dedicated I/O pins. The MIO pins that are required depend on the boot mode selected. The MIO pin required for a boot mode are programmed by the BootROM code. Only those pins associated with the selected boot mode are programmed, the settings for the other MIO pins are not affected.

  • Required, dedicated pins for all boot modes (includes JTAG interface that is recommended, but not required)
  • MIO pins for the boot device interfaces, which includes flash memory devices and SelectMAP