Port Status, Control, Host Interrupter, Event Ring, and Doorbell Registers

Versal ACAP Technical Reference Manual (AM011)

Document ID
AM011
Release Date
2022-04-26
Revision
1.4 English

The USB port status, control, host interrupter, event ring, doorbell registers are located in the USB_2_XHCI register set at base address 0xFE20_0000. They are summarized in the following table.

  • PORTPMSC_20 register

    This register is in the AUX power well. It is only reset by platform hardware during a cold reset or in response to a host controller reset (HCRST).

  • IMOD_0, 1, 2, 3 register

    Software can use this register to pace (or even out) the delivery of interrupts to the host CPU. This register provides an inter-interrupt delay between interrupts asserted by the xHCI, regardless of USB traffic conditions. To independently validate configuration settings, software can use the algorithms recommended by the xHCI specification to convert the inter-interrupt interval value to the common interrupts/sec performance metric.

Table 1. Port Status, Control, Host Interrupter, Event Ring, Doorbell Registers
Register Name Offset Address Access Type Description
PORTSC_20 0x00420 RW, R, W1C Port status and control
PORTHLPMC_20 0x0042C RW LPM hardware control
MFINDEX 0x00440 Read Microframe index
IMAN_0 to 3 0x00460 incr RW, W1C Interrupter management
IMOD_0 to 3 0x00464 incr RW Interrupter moderation
ERSTSZ_0 to 3 0x00468 incr RW Event ring segment table size


            ERSTBA_LO_0
        
to 3

            ERSTBA_HI_0
        
to 3

0x00470 incr
0x00474 incr

RW  


            ERDP_LO_0
        
to 3

            ERDP_HI_0
        
to 3

0x00478 incr
0x0047C incr

RW  
DB0 DB{1 to 63} 0x004E0 incr RW Doorbells