CPM4_ADDRREMAP Module Description
| Module Name | CPM4_ADDRREMAP Module |
|---|---|
| Modules of this Type | CPM4_ADDRREMAP |
| Base Address | 0x00FCF30000 (CPM4_ADDRREMAP) |
| Description | CPM4 Address ReMap |
CPM4_ADDRREMAP Module Register Summary
| Register Name | Address | Width | Type | Reset Value | Description |
|---|---|---|---|---|---|
| IR_STATUS | 0x0000000000 | 32 | mixedMixed types. See bit-field details. | 0x00000000 | Interrupt Status Register for intrN. This is a sticky register that holds the value of the interrupt until cleared by a value of 1. |
| IR_MASK | 0x0000000004 | 32 | roRead-only | 0x0000007F | Interrupt Mask Register for intrN. This is a read-only location and can be atomically altered by either the IDR or the IER. |
| IR_ENABLE | 0x0000000008 | 32 | mixedMixed types. See bit-field details. | 0x00000000 | Interrupt Enable Register. A write of to this location will unmask the interrupt. (IMR: 0) |
| IR_DISABLE | 0x000000000C | 32 | mixedMixed types. See bit-field details. | 0x00000000 | Interrupt Disable Register. A write of one to this location will mask the interrupt. (IMR: 1) |
| SCRATCH_0 | 0x0000000020 | 32 | rwNormal read/write | 0x00000000 | Scratch pad register for software |
| SRC_ADDR0_HIGH | 0x0000000024 | 32 | rwNormal read/write | 0x00000000 | Aperture 0 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR0_LOW | 0x0000000028 | 32 | rwNormal read/write | 0x00000000 | Aperture 0 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE0_HIGH | 0x000000002C | 32 | rwNormal read/write | 0x00000000 | Aperture 0 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE0_LOW | 0x0000000030 | 32 | rwNormal read/write | 0x00000000 | Aperture 0 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR0_HIGH | 0x0000000034 | 32 | rwNormal read/write | 0x00000000 | Aperture 0 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR0_LOW | 0x0000000038 | 32 | rwNormal read/write | 0x00000000 | Aperture 0 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR1_HIGH | 0x000000003C | 32 | rwNormal read/write | 0x00000000 | Aperture 1 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR1_LOW | 0x0000000040 | 32 | rwNormal read/write | 0x00000000 | Aperture 1 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE1_HIGH | 0x0000000044 | 32 | rwNormal read/write | 0x00000000 | Aperture 1 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE1_LOW | 0x0000000048 | 32 | rwNormal read/write | 0x00000000 | Aperture 1 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR1_HIGH | 0x000000004C | 32 | rwNormal read/write | 0x00000000 | Aperture 1 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR1_LOW | 0x0000000050 | 32 | rwNormal read/write | 0x00000000 | Aperture 1 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR2_HIGH | 0x0000000054 | 32 | rwNormal read/write | 0x00000000 | Aperture 2 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR2_LOW | 0x0000000058 | 32 | rwNormal read/write | 0x00000000 | Aperture 2 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE2_HIGH | 0x000000005C | 32 | rwNormal read/write | 0x00000000 | Aperture 2 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE2_LOW | 0x0000000060 | 32 | rwNormal read/write | 0x00000000 | Aperture 2 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR2_HIGH | 0x0000000064 | 32 | rwNormal read/write | 0x00000000 | Aperture 2 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR2_LOW | 0x0000000068 | 32 | rwNormal read/write | 0x00000000 | Aperture 2 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR3_HIGH | 0x000000006C | 32 | rwNormal read/write | 0x00000000 | Aperture 3 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR3_LOW | 0x0000000070 | 32 | rwNormal read/write | 0x00000000 | Aperture 3 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE3_HIGH | 0x0000000074 | 32 | rwNormal read/write | 0x00000000 | Aperture 3 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE3_LOW | 0x0000000078 | 32 | rwNormal read/write | 0x00000000 | Aperture 3 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR3_HIGH | 0x000000007C | 32 | rwNormal read/write | 0x00000000 | Aperture 3 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR3_LOW | 0x0000000080 | 32 | rwNormal read/write | 0x00000000 | Aperture 3 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR4_HIGH | 0x0000000084 | 32 | rwNormal read/write | 0x00000000 | Aperture 3 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR4_LOW | 0x0000000088 | 32 | rwNormal read/write | 0x00000000 | Aperture 4 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE4_HIGH | 0x000000008C | 32 | rwNormal read/write | 0x00000000 | Aperture 4 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE4_LOW | 0x0000000090 | 32 | rwNormal read/write | 0x00000000 | Aperture 4 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR4_HIGH | 0x0000000094 | 32 | rwNormal read/write | 0x00000000 | Aperture 4 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR4_LOW | 0x0000000098 | 32 | rwNormal read/write | 0x00000000 | Aperture 4 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR5_HIGH | 0x000000009C | 32 | rwNormal read/write | 0x00000000 | Aperture 5 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR5_LOW | 0x00000000A0 | 32 | rwNormal read/write | 0x00000000 | Aperture 5 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE5_HIGH | 0x00000000A4 | 32 | rwNormal read/write | 0x00000000 | Aperture 5 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE5_LOW | 0x00000000A8 | 32 | rwNormal read/write | 0x00000000 | Aperture 5 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR5_HIGH | 0x00000000AC | 32 | rwNormal read/write | 0x00000000 | Aperture 5 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR5_LOW | 0x00000000B0 | 32 | rwNormal read/write | 0x00000000 | Aperture 5 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR6_HIGH | 0x00000000B4 | 32 | rwNormal read/write | 0x00000000 | Aperture 6 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR6_LOW | 0x00000000B8 | 32 | rwNormal read/write | 0x00000000 | Aperture 6 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE6_HIGH | 0x00000000BC | 32 | rwNormal read/write | 0x00000000 | Aperture 6 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE6_LOW | 0x00000000C0 | 32 | rwNormal read/write | 0x00000000 | Aperture 6 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR6_HIGH | 0x00000000C4 | 32 | rwNormal read/write | 0x00000000 | Aperture 6 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR6_LOW | 0x00000000C8 | 32 | rwNormal read/write | 0x00000000 | Aperture 6 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR7_HIGH | 0x00000000CC | 32 | rwNormal read/write | 0x00000000 | Aperture 7 - Source Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| SRC_ADDR7_LOW | 0x00000000D0 | 32 | rwNormal read/write | 0x00000000 | Aperture 7 - Source Address - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE7_HIGH | 0x00000000D4 | 32 | rwNormal read/write | 0x00000000 | Aperture 7 - Size - Bits[63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| APER_SIZE7_LOW | 0x00000000D8 | 32 | rwNormal read/write | 0x00000000 | Aperture 7 - Size - Bits[31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR7_HIGH | 0x00000000DC | 32 | rwNormal read/write | 0x00000000 | Aperture 7 - Destination Address - Bits [63:32] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| DST_ADDR7_LOW | 0x00000000E0 | 32 | rwNormal read/write | 0x00000000 | Aperture 7 - Destination Address - Bits [31:0] These registers are programmed by tools for use with CCIX options and are then re-programmed by CCIX-DVSEC FW to setup CCIX SAM to local address remap. User should not change the values in this register space. |
| ADDR_REMAP_CNTRL | 0x00000000E4 | 32 | mixedMixed types. See bit-field details. | 0x00000000 | Control Register for address remap block. Software must quiesce all CMNs AXI transactions before making any changes to the address remap registers. |