The transceiver allows you to reset the entire RX at any time by sending GTRXRESET an active-High pulse. These conditions must be met when using GTRXRESET:
- RXRESETMODE must be set to use sequential mode.
- All RXPMARESETMASK and RXPCSRESETMASK bits should be held to High during the reset sequence before RXRESETDONE is detected High.
- The associated PLL must indicate locked.
- The guideline for this asynchronous GTRXRESET pulse width is one period of the reference clock.
Figure 1. Receiver Reset after GTRXRESET Pulse in Full Sequential Reset