Product Details

Alveo X3522 Data Sheet (DS1002)

Document ID
DS1002
Release Date
2023-08-25
Revision
1.3 English
Table 1. Alveo X3522 NICs Product Details
Specification Alveo X3522 NICs
Production product SKU

X3522-P08G (low latency network adapter)

X3522PV-P08G (adaptable accelerator card)

Total electrical card load

X3522: 35W

X3522PV: 70W

Thermal design power (TDP) 70W
Thermal cooling solution Passive
Form factor Half height, half length
Network interface 2 × DSFP28, each of which supports two ports via a shared PF, currently at 10 GbE
PCIe interface Gen4 ×8 / Gen3 ×8
FPGA
FPGA DDR memory 2 × 4 GB DDR4 component interface 72b with ECC operating at 2400 MT/s
LUTs/Registers/DSP slices 1030K/2059K/1320
Maximum distributed RAM/block Ram/UltraRAM 14.2 Mb/74.3 Mb/99 Mb
Feature summary

X3522:

  • Secure firmware upgrade and hardware root of trust
  • OS support:
    • Red Hat Enterprise Linux (RHEL)
    • Ubuntu
  • UEFI boot support
  • PXE over UEFI
  • NC-SI/PLDM over MCTP SMBus
  • MCTP PCIe VDM
  • Onload support
  • TCPDirect support
  • ef_vi support

X3522PV:

  • Secure firmware upgrade and hardware root of trust
  • Support for XRT/XOCL
  • Support for custom accelerated applications to enable new functionality programmed via P4, HLS, or RTL

The following figure shows the components within the Alveo X3522 NICs.

Figure 1. Alveo X3522 Block Diagram

The XCUX35 is based on the AMD 16 nm AMD UltraScale™ architecture. The programmable logic (PL) region is connected to two DSFP28 cages, each of which supports two ports via a shared PF, currently at 10 GbE. The XCUX35 also has two 4 GB ×72 DDR4 memory component interfaces and a PCIe CEM 3.0 compliant ×8 edge-finger interface.