The Xilinx® Versal® Prime series devices are available in -3 (highest performance), -2, -1 speed grades. The -3 devices can operate at a VCCINT voltage of 0.88V (H), the -2 devices can operate at a VCCINT voltage of 0.88V (H), 0.80V (M), or 0.70V (L), and the -1 devices can operate at a VCCINT voltage of 0.80V (M) or 0.70V (L). Primary supply operating voltages typically scale with VCCINT, except for supported overdrive of the VCC_PMC, VCC_PSFP, VCC_PSLP, and VCC_CPM5 at 0.88V (H) when VCCINT and other primary supplies operate at 0.70V (L). Similar to speed grades, a higher operating voltage typically has higher performance specifications. All devices are screened for standard (S) or low (L) maximum static power. See Versal Architecture and Product Data Sheet: Overview (DS950) for available device ordering options.
DC and AC characteristics are specified in extended (E) and industrial (I) temperature ranges. Except the operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the same for a particular speed grade and operating voltage (that is, the timing characteristics of a -1 speed grade extended (E) temperature range device operating at a VCCINT voltage of 0.80V (M) are the same as for a -1 speed grade industrial (I) temperature range device operating at a VCCINT voltage of 0.80V (M)). However, only selected speed grades, operating voltages, maximum static power screens, and/or devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions. The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the Versal ACAPs, is available on the Xilinx website at https://www.xilinx.com/versal.