Production Silicon and Software Status

Versal AI Core Series Data Sheet: DC and AC Switching Characteristics (DS957)
Document ID
DS957
Release Date
2024-02-29
Revision
1.8 English

In some cases, a particular family member (and speed grade) is released to production before a speed specification is released with the correct label (engineering sample, pre-production, production). Any labeling discrepancies are corrected in subsequent speed specification releases.

The following table lists the production released Versal AI Core device, speed grade, and the minimum corresponding supported speed specification version and Vivado software versions. The Vivado software and speed specifications listed are the minimum releases required for production. All subsequent releases of software and speed specifications are valid.
Table 1. Production Software and Speed Specification Release
Device Performance as a Function of Speed Grade and Operating Voltage (VCCINT) 1, 2
0.88V (H) 0.80V (M) 0.70V (L)
-2 -2 -1 -2LLI -2LSE

-2LLE

 -1
XCVC1502 Vivado tools 2022.2.2 v2.02 Vivado tools 2022.2.1 v2.01 Vivado tools 2023.2 v2.04 Vivado tools 2022.2 v2.00
XCVC1702 Vivado tools 2022.2.2 v2.02 Vivado tools 2022.2.1 v2.01 Vivado tools 2023.2 v2.04 Vivado tools 2022.2 v2.00
XQVC1702 N/A Vivado tools 2023.1 v2.03 N/A N/A Vivado tools 2023.1 v2.03
XCVC1802 Vivado tools 2022.1.1 v2.10 Vivado tools 2021.2.1 v2.05 3 Vivado tools 2022.2.1 v2.11 3,4 Vivado tools 2021.2.1 v2.05 3,4 Vivado tools 2021.2.1 v2.05 3
XCVC1902 Vivado tools 2022.1.1 v2.10 Vivado tools 2021.2.1 v2.05 3 Vivado tools 2022.2.1 v2.11 3,4 Vivado tools 2021.2.1 v2.05 3, 4 Vivado tools 2021.2.1 v2.05 3
XQVC1902 N/A Vivado tools 2022.1 v2.08 N/A N/A Vivado tools 2022.1 v2.08
XCVC2602   Vivado tools 2023.2.1 v2.00   Vivado tools 2023.2.1 v2.00
XCVC2802   Vivado tools 2023.2.1 v2.00   Vivado tools 2023.2.1 v2.00
  1. See Table 1 for the complete list of operating voltages by speed grade.
  2. Blank entries indicate a device and/or speed grade in engineering sample or pre-production status.
  3. The minimum production version of the Vivado tools is 2021.2.1 for designs using XPLL deskew (CLKIN_DESKEW, CLKFB_DESKEW) while CLKIN_DESKEW is connected to CLKIN, MMCM deskew (CLKIN_DESKEW, CLKFB_DESKEW), or CPM mode for PCI Express® with CPM4 to PL interfaces enabled. The minimum production version of the Vivado tools remains at 2020.3 v2.00 for 0.70V (L) devices and 2021.1 v2.01 for 0.80V (M) devices when the designs do not use XPLL deskew, MMCM deskew, or CPM mode for PCI Express with CPM4 to PL interfaces enabled.
  4. The minimum production version of the Vivado tools for -2LLI speed/temperature grade devices is 2022.2.1 v2.11.