GTY and GTYP Transceiver DC Input and Output Levels

Versal Premium Series Data Sheet: DC and AC Switching Characteristics (DS959)
Document ID
DS959
Release Date
2023-11-09
Revision
1.4 English

Table 1 summarizes the DC specifications of the GTY and GTYP transceivers in Versal Premium devices. Consult the Versal Adaptive SoC GTY and GTYP Transceivers Architecture Manual (AM002) for further details.

Table 1. GTY and GTYP Transceiver DC Specifications
Symbol DC Parameter Conditions Min Typ Max Units
DVPPIN Differential peak-to-peak input voltage (external AC coupled) >10.3125 Gb/s 150 – 1250 mV
6.6 Gb/s to 10.3125 Gb/s 150 – 1250 mV
≤ 6.6 Gb/s 150 – 2000 mV
VIN Single-ended input voltage. Voltage measured at the pin referenced to GND. DC coupled VGTY_AVTT = 1.2V –200 – VGTY_AVTT mV
VCMIN Common mode input voltage DC coupled VGTY_AVTT = 1.2V – 2/3 VGTY_AVTT – mV
DVPPOUT Differential peak-to-peak output voltage 1 Transmitter output swing is set to 11111 800 – – mV
VCMOUTDC Common mode output voltage: DC coupled (equation based) 2 When remote RX termination is floating DVPPOUT/2 mV
When remote RX is terminated to VRX_TERM 3 VRX_TERM/2 + DVPPOUT/4 mV
VCMOUTAC Common mode output voltage: AC coupled Equation based DVPPOUT/2 mV
RIN Differential input resistance – 100 – Ω
ROUT Differential output resistance – 100 – Ω
TOSKEW Transmitter output pair (TXP and TXN) intra-pair skew – – 10 ps
CEXT Recommended external AC coupling capacitor 4 – 100 – nF
  1. The output swing and pre-emphasis levels are programmable using the GTY and GTYP transceiver attributes discussed in the Versal Adaptive SoC GTY and GTYP Transceivers Architecture Manual (AM002) and can result in values lower than reported in this table.
  2. Remote RX termination = GND is not supported.
  3. VRX_TERM is the remote RX termination voltage. VCMOUTDC_VRXTERM should be less than 0.92V.
  4. Other values can be used as appropriate to conform to specific protocols and standards.
Figure 1. Single-Ended Peak-to-Peak Voltage

Figure 2. Differential Peak-to-Peak Voltage

The following tables summarize the DC specifications of the clock input/output levels of the GTY and GTYP transceivers in Versal Premium devices. Consult the Versal Adaptive SoC GTY and GTYP Transceivers Architecture Manual (AM002) for further details.

Table 2. GTY and GTYP Transceiver Clock DC Input Level Specification
Symbol DC Parameter Min Typ Max Units
VIDIFF Differential peak-to-peak input voltage 250 – 2000 mV
RIN Differential input resistance – 100 – Ω
CEXT Required external AC coupling capacitor – 10 – nF
Table 3. GTY and GTYP Transceiver Clock Output Level Specification
Symbol Description Conditions Min Typ Max Units
VOL Output Low voltage for P and N RT = 100Ω across P and N signals 100 – 330 mV
VOH Output High voltage for P and N RT = 100Ω across P and N signals 500 – 700 mV
VDDOUT Differential output voltage (P–N), P  =  High (N–P), N = High RT = 100Ω across P and N signals 300 – 430 mV
VCMOUT Common mode voltage RT = 100Ω across P and N signals 300 – 500 mV