Available Speed Grades and Operating Voltages

Versal HBM Series Data Sheet: DC and AC Switching Characteristics (DS960)

Document ID

DS960

Release Date

2024-02-29

Revision

1.4 English

The following table describes the speed grades per device and operating supply voltages for the PMC, PS low power, PS full power, and PL domains. For more information on selecting devices and speed grades, see the Versal Architecture and Product Data Sheet: Overview (DS950).

Table 1. Available Speed Grades and Operating Voltages
Speed Grade	Mode¹	Vivado Design Tools Device Code²	V_CCINT	V_{CC_PSLP}	V_{CC_PSFP}	V_{CC_CPM5}	V_{CC_PMC} ³	V_{CC_SOC}, V_{CC_IO}, and V_{CCINT_IO_HBM}	V_{CC_RAM}	Units
-3HSE	Standard	-3HP-e-S	0.88	0.88	0.88	0.88	0.88	0.88	0.88	V
-2MSE	Standard	-2MP-e-S	0.80	0.80	0.80	0.80	0.80	0.80	0.80	V
-2MSE	Overdrive	-2MHP-e-S	0.80	0.88	0.88	0.88	0.88	0.80	0.80	V
-2MLE	Standard	-2MP-e-L	0.80	0.80	0.80	0.80	0.80	0.80	0.80	V
-2MLE	Overdrive	-2MHP-e-L	0.80	0.88	0.88	0.88	0.88	0.80	0.80	V
-2LSE	Standard	-2LP-e-S	0.70	0.70	0.70	0.70	0.70	0.80	0.80	V
-2LSE	Overdrive	-2LHP-e-S	0.70	0.88	0.88	0.88	0.88	0.80	0.80	V
-2LLE	Standard	-2LP-e-L	0.70	0.70	0.70	0.70	0.70	0.80	0.80	V
-2LLE	Overdrive	-2LHP-e-L	0.70	0.88	0.88	0.88	0.88	0.80	0.80	V
-1MSE	Standard	-1MP-e-S	0.80	0.80	0.80	0.80	0.80	0.80	0.80	V
-1LSE	Standard	-1LP-e-S	0.70	0.70	0.70	0.70	0.70	0.80	0.80	V
The -2LLE, -2LSE, -2MLE, and -2MSE devices allow dual-voltage operation of the PMC, PS, and CPM5 supplies in overdrive mode (0.88V) or standard drive mode (0.70V/0.80V). The overdrive performance values are the same as standard drive mode unless specifically noted. The specified portion of the Vivado design tools device selection code includes speed grade (-3, -2, -1), operating voltages (HP, MP, MHP, LP, LHP), temperature grade, (-e), and maximum static power screen (-S, -L). The physical unclonable function (PUF) is only supported when using a nominal V_{CC_PMC} of 0.70V. Refer to the Versal Adaptive SoC Security Manual (UG1508) in the Design Security Lounge for detailed information on PUF usage, including a V_{CC_PMC} 0.70V solution for mid, high, and overdrive. When using a V_{CC_PMC} 0.70V solution, performance is reduced for functions based on the V_{CC_PMC}. The PUF is not supported in -3H devices.