MIO Peripherals

Kria K26 SOM Data Sheet (DS987)

Document ID
Release Date
1.2 English

A number of peripherals are available within the MIO. The following is a summary of the interfaces that can be configured for your applications.

PS-GTR transceivers (x4)
Four dedicated PS-GTR receivers and transmitters with up to 6.0 Gb/s data rates supporting SGMII, tri-speed Ethernet, PCI Express® Gen2, serial ATA (SATA), USB3.0, and DisplayPort
Gigabit Ethernet MAC (GEM)
Four 10/100/1000 tri-speed GEM peripherals with IEEE Std 802.3 and IEEE Std 1588 revision 2.0 support
DisplayPort controller
Provides a flexible display output with direct memory access (DMA), centralized buffer manager, rendering block, and audio mixer block.
CAN controller
Two full CAN 2.0B, CAN 2.0A, and ISO 118981-1 standards compliant CAN bus interfaces.
USB controller
Two USB 3.0/2.0 device, host, or OTG peripherals, each supporting up to 12 endpoints.
PCI Express controller
Compliant with the PCI Express base specification 2.1 with support for x1, x2, or x4 line width at Gen1 (2.5 GT/s) or Gen2 (5 GT/s) rates.
SD/SDIO/eMMC controller
One SD/SDIO 2.0/eMMC4.51 compliant controller.
UART controller
One high-speed UART (up to 1 Mb/s)
SPI controller
One full-duplex SPI port with three peripheral chip selects.
SATA Host controller
Supports up to two channels at 1.5, 3.0, and 6.0 Gb/s data rates as defined by the SATA specification, revision 3.1
I2C controller
Master and slave I2C interface with support for multi-master designs and clock rates up to 400 Kb/s.