Regeneration of 7 Series/Zynq 7000 Transceiver Files - 16.2 English

Transceiver files for 7 series and Zynq 7000 devices can be generated using transceiver wizards by generating the GT Wizard IP using the following configuration:

For BASE-X or SGMII without fabric elastic buffer mode

Select the Protocol as gigabit ethernet CC and generate the GT Wizard IP. For 2.5G data rates select the TX and RX line rates to be 3.125 Gbps.

For SGMII with fabric elastic buffer/ Dynamic Switching modes

Select Protocol as gigabit ethernet noCC and generate the GT Wizard IP. For 2.5G data rates select the TX and RX line rates to be 3.125 Gbps.

The files delivered can include some or all of the following:

project_dir>/<project_name>/<project_name>.srcs/sources1/ip/<component_name>/synth/transceiver/

• <component_name>_gtwizard_init.v[hd]
• <component_name>_tx_startup_fsm.v[hd]
• <component_name>_gtwizard_multi_gt.v[hd]
• <component_name>_rx_startup_fsm.v[hd]
• <component_name>_gtwizard_gtrxreset_seq.v[hd]
• <component_name>_gtwizard.v[hd]
• <component_name>_gtwizard_gt.v[hd]
• <component_name>_gtwizard_gtp_rxpmarst_seq_vhd.v[hd]
• <component_name>_gtwizard_gtp_rxrate_seq.v[hd]