Transceiver Options - 16.2 English

GT TYPE (GT_Type)

Selects the type of transceiver (GTH/GTY). Applicable only for UltraScale and AMD UltraScale+™ devices with GTH and GTY transceivers. This option is enabled only forAMD UltraScale+™ /AMD UltraScale™ devices. For AMD Versal™ Devices, GTY or GTYP is automatically assigned based on the device.

Valid Values: GTH (Default) and GTY

Reference Clock Frequency (MHz)

This specifies the GT reference clock rate. Valid values are selected in the drop-down menu.

Transceiver Location

This specifies the GT Location. Valid values are selected in the drop-down menu.

DRP Clock Frequency

drpclock and independent clock frequency.

1. If the Transceiver Control and status is enabled, this corresponds to the DRP clock input. It is recommended to connect the independent clock to the same clock frequency.
2. If the Transceiver Control and status is disabled this corresponds to the independent clock.

LVDS Reference Clock Frequency

This specifies the reference clock frequency for the synchronous SGMII LVDS solution. Valid values are selected through the drop-down menu. Applicable only for AMD UltraScale™ devices.