This section describes the Vivado Integrated Design Environment (IDE) used to specify IP options for the cores.
You can customize the IP core for use in your design by specifying values for the various parameters associated with the IP core using the following steps:
1.Select the IP from the IP catalog.
2.Double-click the selected IP or select the Customize IP command from the toolbar or right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) [Ref 4] and the Vivado Design Suite User Guide: Getting Started (UG910) [Ref 5].
Note: When using the AXI Interconnect core in IP integrator, you can dive into its hierarchy and open the configuration dialogs of the underlying AXI Infrastructure cores to view their automatic parameter settings, but you cannot edit the parameters. To explicitly set the parameter values, instantiate the infrastructure core outside of the AXI Interconnect core in the IP integrator block design.
If you are customizing and generating the core in the Vivado IP integrator, see Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994) [Ref 6] for detailed information.
Note: Figures in this chapter are illustrations of the Vivado IDE. This layout might vary from the current version.