|
X-Ref Target - Figure 4-6 
|
Enable write data count
Include write data (s_axis) data count output port.
Enable almost full
Include almost full output port. Can only be enabled if Packet Mode is not used.
Enable programmable full
Include programmable full output port.
Programmable full threshold
Configures the programmable full threshold value. Minimum value: 5+(Number of CDC sync stages if using independent clocks), maximum value: (FIFO depth)-5.
Enable read data count
Include read data ( m_axis ) data count output port.
Enable almost empty
Include almost empty output port. Can only be enabled if Packet Mode is not used.
Enable programmable empty
Include programmable empty output port.
Programmable empty threshold
Configures the programmable empty threshold value. Minimum value: 5, maximum value: (FIFO depth)-5.