- AWUSER Width
- Specifies the width of the
awuser
signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- ARUSER Width
- Specifies the width of the
aruser
signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- WUSER Width
- Specifies the width of the
wuser
signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- RUSER Width
- Specifies the width of the
ruser
signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.
- BUSER Width
- Specifies the width of the
buser
signals (if any) to be
monitored by the protocol checker. This value is only available when the
protocol is AXI4 or AXI3. If set to 0,
the signal is omitted.Note: This value is automatically
set when using IP integrator.