Customizing and Generating the Core - 8.2 English

Video Test Pattern Generator

Document ID
PG103
Release Date
2022-11-04
Version
8.2 English

You can customize the IP for use in your design by specifying values for the various parameters associated with the IP core using the following steps:

1. Select the IP from the IP catalog.

2. Double-click on the selected IP or select the Customize IP command from the toolbar or popup menu.

For details, see the sections, “Working with IP” and “Customizing IP for the Design” in the Vivado ® Design Suite User Guide: Designing with IP ( UG896 ) [Ref 3] and the “Working with the Vivado IDE” section in the Vivado Design Suite User Guide: Getting Started ( UG910 ) [Ref 6] .

If you are customizing and generating the core in the Vivado IP Integrator, see the Vivado Design Suite User Guide: Designing IP Subsystems Using IP Integrator (UG994) [Ref 8] for detailed information. IP Integrator might auto-compute certain configuration values when validating or generating the design. To check whether the values do change, see the description of the parameter in this chapter. To view the parameter value you can run the validate_bd_design command in the Tcl console.

Note: Figures in this chapter are illustrations of the Vivado IDE. This layout might vary from the current version.