The status register contains the status of the receive and transmit data FIFOs, and when interrupt is enabled. This is a read only register. If a write request is issued to the status register it will do nothing but generate write acknowledgment. Bit assignment in the register is described in the following tables. The register is only implemented if C_USE_UART is set to 1.
Indicates that interrupt is enabled.
0 = Interrupt is disabled
1 = Interrupt is enabled
|3||TX FIFO Full||R||0||
Indicates if the transmit FIFO is full.
0 = Transmit FIFO is not full
1 = Transmit FIFO is full
|2||TX FIFO Empty||R||1||
Indicates if the transmit FIFO is empty.
0 = Transmit FIFO is not empty
1 = Transmit FIFO is empty
|1||RX FIFO Full||R||0||
Indicates if the receive FIFO is full.
0 = Receive FIFO is not full
1 = Receive FIFO is full
|0||RX FIFO Valid Data||R||0||
Indicates if the receive FIFO has valid data.
0 = Receive FIFO is empty
1 = Receive FIFO has valid data