Generating Subsystem for 2.5G Operation - 7.2 English

AXI 1G/2.5G Ethernet Subsystem Product Guide (PG138)
Document ID
PG138
Release Date
2023-11-15
Version
7.2 English
To configure the subsystem with 2.5G support, open the AXI 1G/2.5G Ethernet subsystem in Vivado IDE and perform the following steps:
  1. In the Physical Interface tab, select the Ethernet speed as 2.5 Gbps. 2.5G support is not available for AMD Artix™ 7 devices with speed grades other than -2, -2L, and -3.
  2. Select the required phy_type from the physical interface selection.
For more details, see the Tri-Mode Ethernet MAC LogiCORE IP Product Guide (PG051). and 1G/2.5G Ethernet PCS/PMA or SGMII LogiCORE IP Product Guide (PG047).