This section includes information about using AMD tools to customize and generate the core in the AMD Vivado Design Suite.
If you are customizing and generating the core in the AMD Vivado IP integrator, see the Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994) [Ref 7] for detailed information. IP integrator might auto-compute certain configuration values when validating or generating the design. To check whether the values do change, see the description of the parameter in this chapter. To view the parameter value, run the validate_bd_design command in the Tcl Console.
You can customize the IP for use in your design by specifying values for the various parameters associated with the subsystem using the following steps:
1. Select the IP from the AMD Vivado IP catalog.
2. Double-click the selected IP or select the Customize IP command from the toolbar or right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) [Ref 8] and the Vivado Design Suite User Guide: Getting Started (UG910) [Ref 9] .
Note: Figures in this chapter are illustrations of the AMD Vivado Integrated Design Environment (IDE). This layout might vary from the current version.
When the 100G Ethernet IP is selected from the IP catalog, a window displays showing the different available configurations. These are organized in various tabs for better readability and configuration purposes. The details related to these tabs follow: