Frame Address Translation (Translate Command) - 3.1 English

UltraScale Architecture Soft Error Mitigation Controller LogiCORE IP Product Guide (PG187)

Document ID
Release Date
3.1 English

This command is a useful debugging command to translate LFA addresses to PFA addresses and vice-versa. The hex value supplied with this command represents the same value used for error injections in Table 1. The format of the command is:

T {n-digit hex value}

n = 10 for UltraScale and n = 11 for UltraScale+.

After execution of the UltraScale device Translate command, the controller returns data in the hexadecimal format as shown:

I> T C000000000