The first sample estimation illustrates the calculation of error mitigation latency for a single-bit error by the solution implemented in an XCKU40 device with a 90 MHz clock. The solution is configured for the Mitigation and Testing mode with error classification disabled. The initial assumption is that no throttling occurs on the Monitor Interface.
The final sample estimation illustrates an assessment of the additional latency that would result from throttling on the Monitor Interface. Assume the message length in both the first and second samples is approximately 80 bytes, but the buffer depth of the UART helper block is 32 bytes. Further, the UART helper block has been modified to raise the bit rate from 9,600 baud to 460,800 baud. The standard 8-N-1 protocol used requires 10-bit times on the serial link to transmit a 1-byte payload:
