UART Interface - 3.1 English

UltraScale Architecture Soft Error Mitigation Controller LogiCORE IP Product Guide (PG187)

Document ID
PG187
Release Date
2023-11-08
Version
3.1 English

The UART Interface is a UART helper block that serializes and de-serializes the byte-stream ASCII codes used by the Monitor Interface. The helper block uses a standard serial communication protocol and is compatible to a standard RS-232 port, or to USB through a USB-to-UART bridge. For more information, see UART Interface.

The following section describes the different messages and commands available on this interface.