The Basic tab options for the AXI Bridge mode (Functional Mode option) are shown in the following figure.
Figure 1. Basic Tab for AXI Bridge Functional Mode
The options are defined as follows:
- Device / Port Type
- PCI Express Endpoint device or Root Port of PCI Express® Root complex can be selected.
- Enable AXI Slave Interface
- This interface is selected by default, user can de-select this interface.
- Enable AXI Master Interface
- This interface is selected by default, user can de-select this interface.
All other options are the same as those for the DMA Subsystem mode. For a description of these options, see the “Basic Tab” options in Chapter 4: “Design Flow Steps” in the DMA/Bridge Subsystem for PCI Express Product Guide (PG195).