This section includes information about using the Vivado® Design Suite to customize and generate the core.
If you are customizing and generating the core in the
IP integrator, see the
Vivado Design Suite User Guide: Designing
IP Subsystems using IP Integrator (UG994) for
detailed information. IP integrator might auto-compute certain
configuration values when validating or generating the design. To check whether the
values do change, see the description of the parameter in this chapter. To view the
parameter value you can run the
validate_bd_design command in the Tcl
You can customize the IP for use in your design by specifying values for the various parameters associated with the IP core using the following steps:
- Select the IP from the IP catalog.
- Double-click the selected IP, or select the Customize IP command from the toolbar or right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) and the Vivado Design Suite User Guide: Getting Started (UG910).
Figures in this chapter are illustrations of the Vivado Integrated Design Environment (IDE). This layout might vary from the current version.