Duplex Mode - 3.1 English

UltraScale+ Devices Integrated 100G Ethernet Subsystem Product Guide (PG203)

Document ID
PG203
Release Date
2022-11-02
Version
3.1 English

In this mode of operation both the 100G Ethernet IP core transmitter and receiver are active and loopback is provided at the GT output interface, that is, output is fed back as input. Packet generation and monitor are also active in this mode.

To enable this mode of operation, select the duplex mode from the Vivado IDE parameters. This Figure shows the duplex mode of operation.

Figure 5-3: Duplex Mode of Operation

X-Ref Target - Figure 5-3

inset_000025.jpg