• Altering the value of CTL_TX_VL_LENGTH_MINUS1 and CTL_RX_VL_LENGTH_MINUS1 from the default value of 0x3FFF will violate the IEEE 802.3 spec.
• Decreasing the AM spacing will result in less than 100GE bandwidth being available on the link.
• This change can be made only in simulation. For a design to work in hardware, the default value of 0x3FFF must be used.
• Full rate simulation without the SIM_SPEED_UP option should still be run.
• SIM_SPEED_UP is available only when running RTL simulations. The option is not available for post-synthesis or post-implementation simulations.