The RS-FEC Transcode Bypass tab is shown in
This Figure
and is described in
Table: RS-FEC Transcode Bypass Tab
.
Figure 4-4:
RS-FEC Transcode Bypass Tab
|
X-Ref Target - Figure 4-4
|
Table 4-4:
RS-FEC Transcode Bypass Tab
|
Parameter
|
Description
|
Default Value
|
Range
|
|
RS-FEC Transcode Bypass
|
|
Enable RS-FEC Transcode Bypass
|
Selects between RS-Encoder/Decoder only and the full 802.3bj RS-FEC sublayer, including transcoding.
|
0
|
0: Disable
1: Enable
|
|
CMAC Core Selection
|
Select 100G Ethernet Hard IP core location with RSFEC.
|
Based on the FPGA and part number
|
Based on the FPGA and part number
|
|
Notes:
1.
If Enable RS-FEC Transcode Bypass mode is set to
Enable
, the CMAC Core and GT functionalities are not be available; hence all the other tab options will be disabled.
|
