CONFIGURATION_AN_CONTROL_REG1: 00E0 - 4.1 English

10G/25G High Speed Ethernet Subsystem Product Guide (PG210)
Document ID
PG210
Release Date
2023-11-10
Version
4.1 English
Table 1. CONFIGURATION_AN_CONTROL_REG1: 00E0
Bits Default Type Signal
0 0 RW ctl_autoneg_enable
1 1 RW ctl_autoneg_bypass 1
9:2 0 RW ctl_an_nonce_seed
10 0 RW ctl_an_pseudo_sel
11 0 RW ctl_restart_negotiation
12 0 RW ctl_an_local_fault
  1. For simulation, the ctl_autoneg_bypass value is written as 1 during reset. To test with the ANLT enabled configuration, write the register with ctl_autoneg_enable to 1 and ctl_autoneg_bypass to 0.