Tandem PROM/PCIe Resource Restrictions - 1.3 English

UltraScale+ Devices Integrated Block for PCI Express Product Guide (PG213)

Document ID
PG213
Release Date
2023-10-19
Version
1.3 English

The PCIe IP must be isolated from the global chip reset (GSR) that occurs right after the stage 2 bitstream has completed loading into the FPGA. As a result, stage 1 and stage 2 logic cannot reside within the same configuration frames. Configuration frames used by the PCIe IP consist of serial transceivers, I/O, FPGA logic, block RAM, or Clocking, and they (vertically) span a single clock region. The resource restrictions are as follows:

  • A GT quad contains four serial transceivers. In a X1 or X2 designs, the entire GT quad is consumed and the unused serial transceivers are not available to the user application. The number of GT quads consumed depends on the GT quad selection made when customizing the core in the AMD Vivado™ IDE.
  • DCI Cascading between a stage 1 I/O bank and a stage 2 I/O bank is not supported.
  • Set the DCI Match_Cycle option to NoWait to minimize stage 1 configuration time:
set_property BITSTREAM.STARTUP.MATCH_CYCLE NoWait [current_design]