Implementing the Example Design - 5.4 English

MIPI CSI-2 Receiver Subsystem LogiCORE IP Product Guide (PG232)
Document ID
PG232
Release Date
2023-11-06
Version
5.4 English
  1. Open the Vivado Design Suite.

    The Vivado IDE Getting Started page contains links to open or create projects and to view documentation.

    Figure 1. Vivado IDE - Getting Started
  2. In the Getting Started page, click Create Project to start the New Project wizard.
  3. In the Project Name page, name the new project and enter the project location. Make sure to check the Create project subdirectory option and click Next .
  4. In the Project Type page, specify the type of project to create as RTL Project, make sure to Uncheck the Do not specify sources at this time option, and click Next.
  5. In the Add Sources page, click Next .
  6. In the Add Existing IP (optional) dialog box, click Next .
  7. In the Add Constraints (optional) dialog box, click Next .
  8. In the Default Part dialog box, click Boards to specify the board for the target device(ZCU102, SP701, VEK280 and VCK190 boards are supported). Then click Next.
    Figure 2. Vivado IDE - Create New Project
    Figure 3. Vivado IDE - Default Part
  9. Review the New Project Summary page. Verify that the data appears as expected, per the steps above, and click Finish.
    Figure 4. Vivado IDE - New Project Summary
  10. Click IP Catalog and select MIPI CSI-2 RX Subsystem under Video Connectivity, then double-click on it.
    Figure 5. Vivado IDE - Default Part
  11. You can rename the IP component name.Configure the MIPI CSI-2 RX Subsystem Application Example Design tab to select the ZCU102, SP701, or VCK190 or VEK280 board-based design, then click OK.
    Figure 6. Vivado IDE - Customize IP

    The Generate Output Products dialog box appears.

  12. Click Generate. You can optionally click Skip if you want to skip generating the output products.
    Figure 7. Vivado IDE - Generate Output Products
  13. Right-click on the MIPI CSI-2 Rx Subsystem component under Design source, and click Open IP Example Design.
    Note: Because this step involves the generation of the complete system including multiple subsystems, it will take some time to completely build the design.
    Figure 8. Vivado IDE - Open IP Example Design
  14. Choose the target project location, then click OK.
  15. The overall system IP integrator block diagram of the ZCU102, SP701, or VCK190
    Figure 9. Open IP Example Design - Select Example Project Directory

    board-based application example design is generated depending on the GUI option selected. You can choose to Run Synthesis, Implementation, or Generate Bitstream (Generate Device Image for the VCK190 board).

    Figure 10. Overall System IP Integrator Block Diagram for ZCU12-based Example Design
    Figure 11. Overall System IP Integrator Block Diagram for SP701-based Example Design
    Figure 12. Overall VCK190 System IP Integrator Block Diagram
  16. Select File > Export > Export hardware (.xsa)
    Figure 13. Exporting Hardware
  17. Select Tools > Launch Vitis IDE. Browse to your project location.
  18. To create a new platform project using the generated .xsa file, click on the Create new platform tab in the Vitis window and follow the steps shown in Figure 14 to Figure 16.
    Figure 14. Create a New Platform
    Figure 15. Create from Hardware Specification
    Figure 16. Browse to the xsa Path
  19. Select the mipi_example platform in the explorer window and click on the hammer to build it.
  20. When the platform is created, open platform.spr > Board support package > mipicsiss.
    Figure 17. Choose the MIPI-Specific Hardware Driver
  21. Next, import the example and select the application corresponding to your hardware. Note the following:
    • For the SP701 board based example design, select application xmipi_sp701_example
    • For the ZCU102 board based example design, select application xmipi_example
    • For the VCK190 board based example design, select application xmipi_vck190_example
    • For the VEK280 board based example design, select application xmipi_vek280_example
    Figure 18. Select Application Corresponding to the Selected Board
  22. Click on Project > Build to get the example design built and ready to use.
    Figure 19. Build Application