VCK190 Application Example Design Overview - 5.3 English

MIPI CSI-2 Receiver Subsystem Product Guide (PG232)

Document ID
Release Date
5.3 English

The Application Example Design demonstrates the use of the MIPI CSI-2 RX Subsystem on a VCK190 board. On the capture path, the system receives images captured by an IMX274 image sensor. Processed images are displayed on the HDMI monitor.

The MIPI CSI-2 RX Subsystem decodes, processes video data, and converts to AXI4-Stream data with four pixels data per clock. The RAW video data is then converted into RGB data using the Demosaic IP, V_Gamma_Lut and V_Proc_SS CSC IPs, four pixels at a time and sent to the HDMI Video Out.

Note: Ensure that you have selected the Versal adaptive SoC VCK190 board in the project setup in the Vivado Design Suite. To do this, when you get to the Default Part screen, select the Boards tab, and select Install/Update Boards . This takes you to the Xhub Stores, where you can right click on the VCK190 board and select Install . This installs the VCK190 board support files.