Resets - 3.2 English

HDMI 1.4/2.0 Transmitter Subsystem Product Guide (PG235)

Document ID
PG235
Release Date
2023-10-18
Version
3.2 English

Each AXI input interface has its own reset signal. The reset signals, s_axi_cpu_aresetn, s_axis_video_aresetn, and s_axis_audio_aresetn are for S_AXI_CPU_IN, VIDEO_IN (AXI4-Stream Video Interface), and AUDIO_IN respectively. These three reset signals are active-Low. Because the reset signal is used across multiple sub-blocks in the subsystem, keep the system in the reset state until all the clocks are stabilized. You can use the locked signal from the clock generation block as a reset signal.

Note: There is no dedicated hardware reset for the NATIVE_VID_IN interface when Native Video or Native Video (Vectored DE) interface is selected. However, the HDMI 1.4/2.0 TX Subsystem outputs a video_rst signal, which you can use to reset its Native Video or Native Video (Vectored DE) Source generation modules.