Migration Notes - 3.2 English

HDMI 1.4/2.0 Receiver Subsystem v3.2 Product Guide (PG236)

Document ID
PG236
Release Date
2023-10-18
Version
3.2 English

When migrating from version 2016.3 or earlier, note the following:

  • Hot Plug Detect Active has been added to HDMI 1.4/2.0 Transmitter Subsystem GUI.

    Choose High in the Example Design (according to board design).

  • Hot Plug Detect Active has been added to HDMI 1.4/2.0 Receiver Subsystem GUI.

    Choose Low in Example Design (according to board design).

  • Cable Detect Active has been added to HDMI 1.4/2.0 Receiver Subsystem GUI.

    Choose Low in Example Design (according to board design).

  • HDCP 1.4/2.3 is enabled by default in Example Design application software.

    Removed UART option to Enable HDCP 1.4 or HDCP 2.3.

  • Auto switching has been added to the Example Design Application software.

    You do not need to choose HDCP 1.4 or HDCP 2.3 from UART. A corresponding HDCP is selected according to the capability of connected source/sink. If the device support both HDCP 1.4 and HDCP 2.3, the priority is given to HDCP 2.3.

  • HDCP repeater feature has been added.

    You can enabled/disable it by selecting h from the UART menu.

  • System log is moved from direct UART printout to event log.

    You can display the event log by selecting z from the UART menu.