Allows you to configure protocol-specific options such as the number of lanes to be used.
| Bits | Name | Reset Value | Access | Description |
|---|---|---|---|---|
| 31:14 | Reserved | NA | NA | Reserved |
| 13 | EoTp | 0x1 | R/W |
0: Disable EoTp Generation. 1: Enable EoTp Generation. |
| 12:7 | Pixel Format | 0x3E | R |
Data type for pixel format. The data type of pixel format is selected through the GUI. 0x0E – Packed RGB565 0x1E- packed RGB666 0x2E – Loosely packed RGB666 0x3E- Packed RGB888 0x0B- Compressed Pixel Stream Note: The default data type selected in the GUI is RGB888. Hence, the default value of the register is mentioned as 0x3E. It varies with the datatype selected in the GUI. |
| 6 | BLLP Mode | 0x0 | R/W |
BLLP selection 0: Send blanking packets during BLLP periods 1: Use LP mode for BLLP periods in Vertical blanking. It is not generated for Horizontal blanking. |
| 5 | Blanking packet type | 0x0 | R/W |
Blanking packet type for BLLP region 0: Blanking packet(0x19) 1: Null packet(0x09) |
| 4:3 | Video Mode | 0x0 | R/W |
Video mode transmission sequence 0x0- Non-burst mode with sync pulses 0x1 – Non-burst mode with Sync Events 0x2- Burst mode |
| 2 | Reserved | NA | Reserved for future lane extension support. | |
| 1:0 | Active Lanes | Configured Lanes during core generation | R |
Configured lanes in the core 0x0 - 1 Lane 0x1 - 2 Lanes 0x2 - 3 Lanes 0x3 - 4 Lanes |