During burst mode of operation, due to time compression of video data, there is BLLP duration available during active region of horizontal lines. This value of “BLLP Burst mode” must be programmed when operating in burst mode.
IMPORTANT: The controller must be programmed with required timing values for video data transfer. For sample examples, refer Example Timing Register Calculations.
|
Bits |
Name |
Reset Value |
Access |
Description |
|---|---|---|---|---|
|
31:16 |
HSA |
0x0 |
R/W |
Horizontal Sync active width blanking packet payload size in bytes (WC)(1) |
|
15:0 |
BLLP Burst Mode |
0x0 |
R/W |
BLLP duration of VACT region packet payload size in bytes (WC). Applicable only Burst mode |
|
Notes: 1.The values of HSA, HBP, and HFP must be greater than 4 bytes. The core functionality is not guaranteed otherwise. |
||||