Decoder Block - 2023.1 English

H.264/H.265 Video Codec Unit v1.2 Solutions LogiCORE IP Product Guide (PG252)

Document ID
PG252
Release Date
2023-05-16
Version
2023.1 English

The decoder block is designed to process video streams using the H.265 (HEVC) and H.264 (AVC) standards. It provides a complete support for these standards, including support for 8-bit and 10-bit color depth, 4:0:0, 4:2:0, and 4:2:2 Chroma formats, up to 4K UHD at 60 Hz performance.

The decoder block efficiently performs video decompression.

The IP hardware has a direct access to the system data bus through a high-bandwidth master interface to transfer video data to and from an external memory.

The IP control software is partitioned into two layers. The VCU Control Software runs on the APU while the MCU firmware runs on an MCU, which is embedded in the hardware IP. The APU communicates with the embedded MCU through a slave interface, also connected to the system bus. The IP hardware is controlled by the embedded MCU using a register map to set decoding parameters through an internal peripheral bus.

The VCU decoder block is shown in the following figure.

Figure 1. VCU Decoder Block